Tectonic Setting Research Articles

Geochronology, geochemistry and Hf isotope of the quartz monzonite and the diorite in Dachaigou, the East Kunlun Orogenic Belt, China, and their geological significance

This study focuses on quartz monzonite and diorite plutons in Dachaigou, East Kunlun, examining their formation, age, petrogenesis, magmatic source and tectonic setting. Through comprehensive field observations, zircon geochronology, geochemistry, and Hf isotope analysis, new insights into the Paleozoic tectonic evolution of the proto-Tethys Ocean in the East Kunlun orogenic belt are provided. Zircon U-Pb dating reveals that quartz monzonite and diorite formed at 417.4 ± 2.1 Ma and 404.6 ± 1.8 Ma, respectively. Geochemical analysis shows that the A/CNK value of quartz monzonite ranges from 0.98 to 1.07, with the Pb content proportional to SiO2, which aligns with the characteristics of I-type granite. The εHf(t) values for quartz monzonite and diorite are -0.84 to 2.2 and -13.22 to 2.04, respectively. Considering the formation age, geochemical characteristics, and regional tectonic evolution, it is concluded that quartz monzonite has a crust-derived origin, whereas diorite has a crust-mantle mixing origin. Both were formed in a post-collision extensional tectonic setting resulting from slab break-off, implying the Proto-Tethys Ocean East Kunlun entered a post-collisional extension stage in the Late Silurian-Early Devonian.

Oligocene melting of subducted mélange and its mantle dynamics in northeast Asia

Melting of subducted mélange can potentially transport mass from the slab-mantle interface to the mantle wedge in subduction zones. The mélange diapir model was primarily proposed from the results of laboratory experiments and thermodynamic modeling. However, the melting mechanisms of mélange diapirs in subduction zones remain unclear. To further constrain the mantle dynamics of a mélange diapir, we studied Oligocene alkaline intermediate rocks on the northeast Asian continental margin. We report whole-rock geochemical and Sr-Nd-Pb-Mg-Zn isotope data and show that these rocks formed by partial melting of mélange. We conclude that a diapir was the mechanism for Oligocene melting of the mélange. We also identified younger rocks formed by melting of mélange in the eastern part of northeast Asia, implying an eastward shift in such magmatism since the Oligocene. Our results and the tectonic setting indicate that melting of mélange diapirs occurred preferentially during tectonic transitions, such as the formation of a back-arc basin triggered by trench-perpendicular mantle flow. The low-viscosity mantle with an incompressible stress field triggered melting of the mélange diapirs. Interactions occurred between the mélange diapirs and carbonated peridotites, constraining the depth of mélange-mantle interactions to the asthenosphere, which is deeper than the depth inferred in previous studies.

Geochemical characterization and zircon U–Pb geochronology of the Tirodi Gneissic Complex, Central Indian Tectonic Zone (CITZ): constraints on petrogenesis, Proterozoic crustal evolution and tectonic setting

Geochemical characterization and zircon U–Pb geochronology of the Tirodi Gneissic Complex, Central Indian Tectonic Zone (CITZ): constraints on petrogenesis, Proterozoic crustal evolution and tectonic setting

Neotectonism and reactivation of tectonic elements in eastern part of Shillong Plateau, India: constraints from morpho-tectonic analyses

ABSTRACT The Shillong Plateau is the only elevated topography in the Himalayan foreland bounded and crisscrossed by several prominent faults and shear zones. The plateau is situated in a complex tectonic compressional set up, owing to which the fault systems both at the periphery and within tend to be neotectonically active. Due to the elevation difference of the plateau with the Brahmaputra and Meghna River valleys flanking it, coupled with the impervious lithologies present, an intricate network of drainage system has developed in the plateau. In this paper, morphometric and structural analyses of four selected drainage basins from the east-central part of Shillong Plateau have been carried out to comprehend the effects of neotectonic reactivation of fault systems and associated basin tilting which in turn controls the development of drainage pattern. This has led to the understanding of the effects of the ever-evolving fluvial landforms on the anthroposphere in this part of Indian sub-continent, where the agrarian-economy is completely dependent on the intricate fluvial systems.

Origin and tectonic setting of low-Si alkaline magma

Origin and tectonic setting of low-Si alkaline magma

Geochemistry of siltstones in the North Qilian Zhongbao–Mayinggou formations (Late Ordovician–Early Silurian): implications for paleoclimate, paleoweathering, and tectonic setting

The Late Ordovician–Early Silurian period witnessed the Phanerozoic mass extinction, glacial events, and volcanic events. Paleoweathering indexes chemical index of alteration (CIA), chemical index of weathering (CIW), and plagioclase index of alteration (PIA) indicated that the source area weathering changed from weak to moderate to intense. CIA values in the upper Zhongbao formation ranged from 66.71% to 73.97%, indicating a drier and colder climate. Upward, the CIA values on the bottom of the Mayinggou formation returned to the high value quickly (from 73.86% to 81.31%), suggesting that the ice age ended, the climate became warmer and wetter, and the sea level rose. The Al2O3–(CaO*+Na2O)–K2O triangular plots, Hf-La/Th, and SiO2–Al2O3/TiO2 bivariate plots inferred that the source of the siltstones in the two formations is mostly from the felsic igneous rocks. The samples from the Zhongbao–Mayinggou formations have chondrite-normalized rare earth element (REE) patterns similar to that of the North Qilian volcanic arc rocks. Geochemical discrimination plots displayed that the sediments of the Zhongbao–Mayinggou formations came from the active continental margin setting.

Unfolding rotational tectonics and topographic evolution from localized verses diffuse plate boundary counterparts

We present a kinematic model developed from geodetic observations, topography analysis and analogue tectonic modelling results, which reveals a striking similarity between the rotational tectonic settings of the Gakkel Ridge-Chersky Range system in the Arctic, and the Central Indian Tectonic Zone within the Indian subcontinent. A crucial aspect of large-scale extensional rift systems is the gradual variation of extension along the rift axis, due to plate rotation about a Euler pole, which may lead to contraction on the opposite side of the Euler pole to form a rotational tectonic system. Our geodetic and topographic analysis, combined with the reanalysis of analogue tectonic modelling results demonstrates such rotational tectonic plate motion in both the Arctic and Indian case. However, the plate boundary between the North American and Eurasian Plates as represented by the Arctic Gakkel Ridge-Chersky Range system is strongly localized, whereas the Central Indian Tectonic Zone that separates the North and South India Plates involves diffuse deformation instead. Furthermore, in both the Arctic and Central Indian we find that the relative Euler rotation pole is located near an indenter-like feature, which possibly controls the present-day rotational tectonics and contrasting topography on opposite sides of the Euler pole.

Paleoproterozoic Rocks of the Belcher Islands, Nunavut: A Review of Their Remarkable Geology and Relevance to Inuit-led Conservation Efforts

The Paleoproterozoic Belcher Group (ca. 2.0 to 1.83 Ga) occurs on the remote Belcher Islands of Hudson Bay in Nunavut, Canada. It includes nearly nine kilometres of well-preserved siliciclastic and carbonate sedimentary rocks, deposited initially in a marginal to shallow marine setting representing one of the first true continental shelf environments on the proto-Canadian Shield. A wide variety of depositional facies exists within the Belcher Group, and it is particularly well known for its spectacular stromatolites in dolostone. In addition to these macroscopic features, two of its formations (Kasegalik and McLeary) contain intact microfossils of Eoentophysalis belcherensis, the oldest known occurrence of cyanobacteria in the geological record. The uppermost part of the Belcher Group contains sedimentary rocks of very different character that represent a younger foreland basin that developed in response to accretionary and collisional processes of the Trans-Hudson orogen. These younger formations (Omarolluk and Loaf) consist of a thick sequence of turbidites, overlain by arkose and other immature clastic sedimentary rocks. A defining characteristic of the Omarolluk Formation is the presence of calcareous concretions. The Omarolluk Formation shares attributes with “omars”, which are glacially transported clasts that occur both locally and further afield throughout parts of Canada and the northern United States and have helped characterize Pleistocene ice-flow trends across the continent.  The Belcher Group also includes two formations dominated by spectacular mafic volcanic rocks. The earlier episode, represented by the Eskimo Formation, reflects eruption of largely subaerial volcanic flows interpreted to represent flood basalt associated with the rifting of Archean basement during the establishment of the continental shelf. A later volcanic episode (the Flaherty Formation) is dominated by submarine pillowed basalt flows and has been assigned to varied tectonic settings, including volcanic arcs related to subduction and oceanic plateaus related to mantle plume activity and renewed rifting along the continental margin. This later volcanism marks the transition from shelf to foreland basin. Mafic sills and related intrusions (Haig intrusions) occur in the middle and lower part of the Belcher Group. Thermal and chemical interactions between mafic magma and calcareous shale generated unusual rocks that are well known in Nunavut as high-quality artisanal carving stone. The Belcher Group also contains Superior-type iron formations that have attracted past exploration interest.   The Belcher Group is a unique geological entity defined by its wide variety of rock types, its superb exposures, and its potential to illustrate many important geological processes in a formative time in Earth’s history. It is also a unique microfossil paleontological resource, and its deposition brackets a crucial and much-debated interval of Precambrian atmospheric and oceanic evolution. It represents an important scientific resource in the context of understanding such changes. This general review paper highlights its most important features, discusses its potential for future research and contributes to wider discussions about its possible future role as a protected area within Nunavut.

The length and spacing of river tributaries

River networks are composed of a mainstem and tributaries. These tributaries dissect landscapes, regulate water and habitat availability, and transport sediment and nutrients. Despite the importance of tributaries, we currently lack theory and data describing whether and how tributary length and spacing varies within watersheds, thereby limiting our ability to accurately describe river network geometry. We address this knowledge gap by analyzing 4,696 tributaries across six landscapes with varying climate, tectonic setting, and lithology. Our results show that both tributary length and spacing systematically increase with downstream distance along the mainstem river, following a power-law scaling. This power-law scaling can be modulated by basin shape, with tributaries becoming shorter and, in some cases, more closely spaced as basin elongate. Furthermore, the power-law scaling may break down in cases where river networks have been disturbed by pervasive faulting, raising the possibility that the scaling we observe is not unique to all branching networks, and instead may be universal across undisturbed fluvial networks. These findings can be used to improve predictions of river network geometry and potentially to distinguish fluvial river networks from other branching networks.

Detrital mode and geochemical constraints on the provenance, paleoweathering and tectonic setting of the Surma sediments of Chittagong-Tripura fold belt, Tripura, India

The Chittagong Tripura Fold Belt (CTFB), the folded eastern part of the Bengal Basin is critical for understanding sediments origin and tectonic evolution linked to interactions among the Indian, Eurasian, and Burma plates. The upper Bhuban and Bokabil sediments (Surma Group) from Atharamura anticline, Tripura, India were analyzed using whole-rock geochemistry and petrography to assess their provenance, tectonics, weathering, and depositional milieu in this least explored area. Petrographic study indicates sub-lithic arenite to sub-arkosic composition, with moderate-high quartz, feldspar poor containing metamorphic and sedimentary lithic fragments (Bh Q88.3F3.0L8.6; Bk Q83.5F7.6L8.8), indicating significant recycled orogen source. Geochemical characteristics such as Eu/Eu* (0.6, 0.7), La/Sc (3.2, 2.4), Th/Sc (1.7, 1.4), Th/Co (1.9, 1.8), CIA/WIP (∼1–2), high Hf, Zr/Sc, low K2O/Al2O3 and enriched LREEs, depleted HREEs, and negative Eu anomalies, indicate a recycled provenance of felsic origin that underwent moderate to intense chemical weathering in active continental margin settings. Radiolarian chert, volcanic lithic fragments with Barail-like recycled sediments strongly suggests an additional detritus from uplifted Indo-Burman Ranges from the east. Elevated Th/U and Th/Rb ratios, sediment immaturity and poor sorting suggest first-cycled detritus. This study indicate that Tripura Neogene sediments are chiefly Himalayan-derived, with minor inputs from IBR and Meghalaya Plateau. Sedimnets deposited under brackish near shore to shallow marine oxic basins to the west of the uplifted IBR during the Miocene. The study offers insights into regional geological processes, facilitating correlation of foreland Neogene basins and enhances understanding of the geological evolution of the CTFB.

Radiogenic geothermal systems of Bangka Island, Indonesia: Implications of high heat production and tectonic framework

The presence of geothermal manifestation in Bangka Island (Southeast Sumatra, Indonesia) with the absence of Quaternary volcanic activity and also relatively low seismicity events has raised intriguing questions on the control of the geothermal system in this area. As the regional tectonic setting of Indonesia volcanic geothermal systems has been known, that of non-volcanic geothermal systems such as radiogenic system become an issue to be investigated. This study reports the geochemistry and petrography analysis of Triassic granite related to radiogenic production at the vicinity of hot springs in Bangka Island. Surface temperatures of the Bangka hot springs range from 37 to 70.7 °C and pH values vary between 5.6 and 7.5. These hot springs are discharging either in close to massive granite bodies or occur in between two major NE-SW striking faults zones, i.e., Pemali fault and Payung fault. Our results indicate the average radiogenic heat production of Late Triassic Klabat granite in the northern area ranges from 28.5 to 38.34 μWm−3 and the southern area ranges from 28.3 to 49.5 μWm−3. In comparison to similar granite belt located in Malaysia, heat production of granitoid in Bangka hot springs is four times higher, possibly due to their different granite origins.

Geochemical constraints on the Gano karst bauxite deposit, eastern Alborz Mountains, northern Iran: Implications for provenance, elemental mobility, and distribution of critical metals

The Gano karst bauxite deposit is located in the eastern Alborz Mountains, 90 km NE of Semnan city, northern Iran. The layers and lenticular patches of bauxite are hosted in the Triassic karstified carbonate rocks interbedded with calcareous shale of the Elika Formation, unconformably overlain by siliciclastics of the early Jurassic Shemshak Formation. The bauxite ores have a mineral assemblage dominated by diaspore and hematite, with lesser kaolinite, illite, chlorite, goethite, anatase, dolomite, and quartz. In the Gano area, intrusions range from monzonite to quartz monzonite in composition with an alkaline composition that generated in an extensional regime within a plate tectonic setting during the Devonian age. Geochemical signatures of the Gano bauxite ores suggest a derivation from the monzonite intrusions at the base of the Elika Formation, although a contribution of interbedded calcareous shale of the Elika Formation cannot be excluded. Based on the variation of Ce anomaly across the studied profile and the integration of petrographic evidence and mineralogical and geochemical data, the Gano deposit formed in an oxidized environment under warm-humid climates, significantly linked to rainfall seasonality and groundwater-level fluctuations. Gallium, Nb, and V median values of the Gano bauxite ores are a bit above the maximum value of these critical metals in the northwestern Iranian and Alborz bauxite data set, making diaspore-, anatase-, and hematite-rich layers and lenses valuable for further exploration of these critical metals.

Detrital signatures of clastic serpentinite in tectonically diverse settings and interpretation of an example from the Northern Apennines

Abstract Serpentine-bearing sediment, a rare sediment type that is formed and deposited in divergent, convergent, transform, and collisional plate-tectonic settings, carries important evidence of sediment provenance. Specific sources of serpentine-rich sediment display grain assemblages of distinct character that can be used to infer the serpentinization condition and sediment formation. This study reports quantitative and qualitative results on serpentine components in sandstones from Ocean Drilling Program Legs 149 (Iberia), 210 (Newfoundland), and 125 (Mariana and Izu–Bonin regions), and from serpentine-rich debris flows and arenitic breccias in deep-water successions in the Northern Apennine fold–thrust belt. We propose a textural scheme that offers a visual guidance for evaluating serpentinite grains that can be broadly adopted, is easily reproducible, and reduces user bias in determining compositional modes that allow comparison of serpentinite grain populations in arenites from different depositional environments, provenance, and associated tectonic settings. These data allow us to define a scheme for serpentine-dominated deposits that demonstrates the presence of two main groups of grain textures (pseudomorphic and non-pesudomorphic) with specific mineralogy and crystal shape as a function of temperature and pressure in the source rocks. The quantitative analysis of the serpentine-rich arenites and fine-grained sediments derived from forearc and rifted continental-margin settings shows that the studied samples are characterized by high percentages (c. ≥ 80%) of serpentine detritus and subordinate dense minerals and other lithic fragments, including basalt. In rifted continental-margin settings, the prevalent textures in serpentinite sandstones consist of polygonal mesh, mesh-core, and hourglass that all belong to the pseudomorphic category, which preserves the pre-serpentine features and mineralogy. These textures are typically formed in low-temperature conditions (< 390°C); lizardite is the most common mineral, along with minor chrysotile and, in rare cases, antigorite. In contrast, in forearc settings, serpentine-rich grain assemblages exhibit dominantly non-pseudomorphic, interlocking, and interpenetrating textures, dominantly composed of lizardite and recrystallization of lizardite by antigorite. Minor preserved ultramafic minerals related to dynamic recrystallization might be associated with the diapiric rise and protrusion of serpentine bodies. The Northern Apennines case study adopted to test this model indicates that the relationship of detrital serpentine texture to setting can be employed in provenance studies. Firstly, serpentine-bearing sediments derived from ophiolites deformed in fold–thrust belts have more variable serpentinite content, ranging from a few percent to < 10% for samples from deep marine environments, to typically c. 20 to ≤ 50% for stream and beach samples. This compositional variation arises from mixing of sediments derived from deeper to shallower oceanic lithosphere (peridotites and serpentinites) with material from overlying volcanic rocks and sedimentary cover. The deep-water serpentine-rich sands of the Northern Apennines display variable compositions with intermediate characteristics. The source of the serpentine-bearing deposits is interpreted to be a residual oceanic lithosphere characterized by subcontinental mantle-lherzolite originated in the Middle–Late Jurassic by mantle delamination. The serpentinite-dominated debris flows and sand beds contain serpentine grains that exhibit compositional and textural transitions from pseudomorphic to non-pseudomorphic categories, along with changes in mineralogy from lizardite to antigorite. Serpentinite with pseudomorphic texture is observed in the mantle section away from the deformed area. On the contrary, the presence of serpentine-rich arenites with dominant non-pseudomorphic textures suggests derivation from tectonized serpentine along fault scarps and or as products of serpentine diapirism. The detailed serpentinite texture scheme used to classify sand grains in this study includes pseudomorphic (often lizardite, minor crysotile) and non-pseudomorphic textures, with the latter attributed to temperature- and pressure-controlled recrystallization (often to antigorite) or shearing during or after serpentinization. For comparison of different detrital-serpentinite populations, a new ternary plot is proposed where counted parameters are grouped into three end members: undeformed, deformed, and recrystallized. This plot appears to discriminate different sources of detrital serpentine by tectonic setting (e.g., Iberia and Newfoundland margins vs. Mariana forearc) and shows the potential complexity of serpentinite sources in the Apennine basin example. Additional texturally based petrographic data sets are needed to determine the usefulness of this plot in provenance studies.

The Zircon U-Pb Age, Hf Isotopes, and Lithogeochemistry of Ore-Bearing Rocks from the Archean Hongtoushan Volcanogenic Massive Sulfide Deposit in the North China Craton: Implications for Tectonic Setting

Volcanogenic massive sulfide (VMS) deposits are globally significant sources of metals. The Hongtoushan VMS deposit is the only large Archean Cu-Zn VMS deposit in the North China Craton, carrying substantial economic value. Significant deformation and metamorphism have made the tectonic setting of the Hongtoushan VMS deposit the subject of extensive debate. This study investigates the petrogenesis and chronology of the ore-bearing host rocks from the Hongtoushan Cu-Zn VMS deposit in the North China Craton. By utilizing whole-rock geochemical analyses and zircon dating, this research sheds light on the origin and evolution of the ore-bearing rocks within the deposit. The whole-rock geochemical analysis data indicate that the Hongtoushan ore-bearing rock series is mainly composed of amphibole plagioclase gneiss (basalt protolith) and biotite plagioclase gneiss (andesite and rhyolite protolith), suggesting a complete volcanic cycle from basic to medium-acidic volcanic rocks. The amphibole plagioclase gneiss has slight LREE enrichment patterns with unremarkable depletions of Nb, Ta, and Ti and belongs to contaminated ocean plateau basalt (OPB) in terms of composition, which is generally interpreted as being generated from the mantle plume head. Meanwhile, the biotite plagioclase gneiss has relatively steep LREE enrichment distribution patterns with remarkable negative Ta, Nb, and Ti anomalies and a wide range of Zr/Y ratios, indicating their classification as FI- and FII-type felsic rocks; they were likely formed through the fractional crystallization of basic magma combined with crustal assimilation. When combined with the zircon dating results, the ore-bearing host rocks of the Hongtoushan VMS deposit were generated via a continuous magmatic evolution process. The zircon dating of the host rocks indicates a formation age of between 2609 and 2503 Ma, with metamorphic events between 2540 and 2466 Ma, which is consistent with the 2.5 Ga-related global mantle plume event. Further research shows that the ore-bearing host rocks are more likely to have been formed in a mantle plume-related stretching environment, possibly a margin rift.

Petrochemistry of Ultramafic Rock in Baula - Pomalaa Ophiolite Complex, Southeast Sulawesi, Indonesia

Baula and Pomalaa Ophiolitic Complexes are part of East Sulawesi Ophiolite (ESO). The ultramafic rocks in the Baula and Pomalaa Ophiolite Complex mainly is peridotite and consist of harzburgite, lherzolite and olivine websterite, mostly serpentinized. Chemical and petrological research has focused on minerals, such as olivine, pyroxene, and spinel. This study examines the tectonic setting and temperature of ultramafic rock formation. Twelve ultramafic rock samples were examined using geothermometers made of pyroxene, petrographic examination, and coexisting olivine and spinel analyses. SEM and petrographic analysis of pyroxene lamellae and mylonite-ultramylonite structures allowed for the measurement of the geothermometer of ultramafic rocks. Using SEM-EDS, the coexistence of olivine and spinel was analyzed to determine the type of ultramafic tectonic setting. In the coexistence of olivine and spinel, olivine and spinel oxide compounds as tectonic setting markers in the form of Fo and Cr# values. Ultramafic rocks have different temperature levels, based on pyroxene thermometer, and the first one starts at a high temperature of 1000-1200ºC. It is characterized by thin, elongated augite lamellae. Instead, large lamellae characterize augite at medium temperatures (800–1000ºC). Irregular, anhedral, and broader forms of enstatite lamellae are typical of low temperatures (500–800ºC). Different generations of exsolution lamellae indicate that magma cooling was gradual. The distribution of #Fo ranged from 0.87 to 0.92, and Cr# values ranged from 0.13-0.19. According to coexisting olivine and spinel analysis. On the Olivine-Spinel Mantle Array (OSMA), the Fo and Cr# plot indicates that the peridotites tectonic setting was from the ocean floor and the magmatism was from MORB (Mid Oceanic Ridge Basalt). The Al2O3 vs. TiO2 pattern in spinel lherzolite also similar with Ampana and Kabaena peridotites magmatism.

The Utilization of LiCSBAS for Deformation Monitoring in Geresa Segment of Matano Fault, Central Sulawesi, Indonesia

Sulawesi is situated between the confluence of three plates, resulting in a very complex tectonic setting on the island. This has an impact on the occurrence of geological structures, including faults. One of them is the Matano Fault which consists of 6 segments (Kuleana Segment, Pewusai Segment, Matano Segment, Pamsoa Segment, Ballawai Segment, and Geresa Segment). The research area is located in Morowali Regency, covering the Geresa Segment. Morowali Regency recorded an earthquake with a magnitude of 5.7 in 2012. This indicates that deformation has occurred. Therefore, this study aims to identify the deformation velocity around the Geresa Segment area. The methods used are geological observation and satellite image data processing to obtain information on deformation rates. The geological field study includes aspects of geomorphology, geological structure, and the rock types distribution. Meanwhile, the processing of satellite image data in the form of InSAR is carried out through the LiCSBAS package tools that has been integrated with LiCSAR. The analysis results illustrate the difference in deformation velocity around the Geresa Segment area. The area which is composed of Tolaka formation and Ultramafic complex tends to uplift with a deformation rate of up to 17 mm/year. In addition, alluvium that covers the southeastarn part has a land subsidence of up to 7 mm/year.

Determining complex petroleum migration pathways along faults and sandbodies: a new method and application

Introduction: The reservoir-forming rule in the paleo-slope zone outside petroliferous basins’ source kitchens of the eastern basin in China is unclear, manifested in the distribution of oil and gas in complex multi-layers. This study focuses on petroleum migration along faults and sandbodies to clarify this question and improve the exploration efficiency of petroleum in areas with similar geological conditions.Method: We summarized two models of petroleum migration based on two factors: the connected sandbodies and the vertical unsealing faults. Model I is conducive to the migration of hydrocarbons within a single layer, while Model II is conducive to the vertical migration of hydrocarbons across layers. Combining the means for evaluating fault sealing and sandbody connectivity, integrating these models could form a set of characterization methods for the distribution of the complex fluid migration pathways.Results: This method is applied to characterize the complex multilayer migration pathways distribution in the first and second members of the Shahejie Formation in the central-southern area of the Wen’an Slope in the Baxian Sag, Jizhong Depression, Bohai Bay Basin, China. The results show that, in the first and second members of the Shahejie Formation in the central-southern area of the Wen’an Slope, the area for Model II is mainly distributed in the central-eastern regions. The second member has a Model I area distributed in its western region, and the first member has a Model I area distributed in its centraleastern parts. The latter distribution area is larger than the former. According to hydrocarbon migration analysis, the first member is more conducive to large regional migration and accumulation of hydrocarbons than the second member.Discussion: The predicted result of petroleum migration is consistent with the hydrocarbon distribution found in the central-southern areas of the Wen’an Slope, which is that oil and gas distribution in the first member is significantly greater than that in the second member. Thus, our method is feasible for characterizing the regional distribution of complex multi-layer migration pathways in simple tectonic setting and oil source conditions. However, further research is still needed to increase the effectiveness of present petroleum migration analysis.

Implications of input ground-motion selection techniques on site response analyses for different tectonic settings

This study investigates how current practices of input ground-motion selection influence site response analysis results and their variability, when considering different tectonic settings. Study sites in Seattle and Boston are chosen to represent tectonic settings with contributions to the seismic hazard from shallow crustal and subduction events, as well as stable continental regions, respectively. Selected input ground-motion suites for one-dimensional site response analysis represent variations in the target spectrum definition, spectral period of interest, seismic source, and ground-motion database. When directly incorporating different types of seismic sources (e.g. shallow crustal versus subduction) into target spectrum definitions and selecting ground motions from the corresponding databases (i.e. consistent with such seismic sources), differences on the estimated site response and its variability are observed. These effects are captured by spectral amplification factors and nonspectral intensity measures (significant duration and Arias intensity) and become particularly apparent for subduction zones. The variability in spectral amplification factors stemming from ground-motion selection techniques is found to be also a function of the characteristics of the site, becoming higher near the fundamental period of the site. Estimated responses at stiffer sites are more significantly influenced by ground-motion selection techniques, whereas the onset of nonlinear soil behavior at softer sites can reduce such variability.

The role of intra-oceanic arc in the growth of continental crust: Evidence from the Early Paleozoic Bainaimiao arc

The Early Palaeozoic arc-related formations in the northern margin of the North China Craton (NCC) belonging to the Bainaimiao arc belt is an important part of the eastern Central Asian Orogenic Belt (CAOB). The tectonic evolution of this belt remains controversial. Here we present detailed data on the geochronology and geochemistry on a newly identified Early Palaeozoic igneous suite from the Faku area in northern Liaoning. Zircon U–Pb dating of the Faku volcanic and intrusive rocks yielded weighted mean 206Pb/238U ages of ca. 458 Ma and 433–405 Ma, respectively, which represent their crystallization (eruption) times. Zircon Hf isotopic analyses show a low negative to positive εHf (t) values of − 0.33 to + 12.4, implying depleted characteristics of the source. The geochemical features of Laolingshan basaltic andesites display higher TiO2 and lower P2O5 contents, similar to that of mid-ocean ridge basalts, and relatively high Zr/Y and low Ta/Yb ratios, suggesting oceanic island arc basalt affinity. Therefore, we suggest that the Laolingshan basaltic andesites were formed in an intra-oceanic environment. The Bachagou granodiorites, with adakitic geochemical signatures, belong to the calc-alkaline and high-K calc-alkaline series, implying formation in an active continental margin tectonic setting. The Baerhushan granodiorites, which geochemically belong to S-type granites, were probably formed in a syn-collisional environment influenced by arc–continent collision. The Donggou granitoids, which have higher SiO2 and alkali and lower MgO and P2O5, show A-type granite features. Geochemical characteristics of the Donggou A-type granite suggest formation in an extensional setting caused by orogenic intermittent extension. The Baerhushan gabbro diorites, which display properties of both mid-ocean ridge and continental rift basalts, were produced under post-orogenic extensional tectonic setting after the arc–continent collision. Our study traces the Early Palaeozoic tectonic evolution of the south-eastern segment of the CAOB and the related accretionary tectonics.

Time-dependent magnetic anomaly variations in Turkey and Greece using swarm satellites: A comprehensive precursory multi-track analysis of M≥6 earthquakes from 2017 to 2020

This article presents a comprehensive multi-track analysis aimed at investigating time-dependent magnetic anomaly variations in Turkey and Greece resulting from five M ≥ 6 earthquakes occurring between January 2017 and October 2020. The study utilizes data from the Swarm satellites and employs various analytical techniques, including first-time derivative calculations, long-wavelength component removal, and moving RMS filters, to construct cumulative anomaly count graphs for each magnetic component. By eliminating the influence of the external magnetic field, we focus solely on the magnetic components (X, Y, Z, and F). The changes in magnetic anomalies before, during, and immediately after the earthquakes are carefully interpreted. The research systematically analyses the Plomari (June 12, 2017), Kos (July 20, 2017), Doğanyol (January 24, 2020), Özalp (February 23, 2020), and Karlovasion (October 30, 2020) Earthquakes, considering the mainshock and aftershock responses for each magnetic component. The findings reveal intriguing patterns, most notably the emergence of distinctive S-shaped anomalies in various magnetic components. Moreover, the study highlights the influence of significant earthquakes, such as Plomari and Kos, on cumulative anomalous tracks, providing critical insights into magnetic field behavior. Additionally, the study investigates the potential impact of the Özalp Earthquake on the magnetic anomalies observed in the Doğanyol earthquake and explores the relationship between the occurrence of the Doğanyol Earthquake and the precursory anomalies leading to the mainshock of the Özalp Earthquake. Furthermore, the analysis of the Karlovasion earthquake identifies magnetic anomalies preceding the mainshock. Finally, the research subjectively assesses the lateral and vertical scores of the five earthquakes to capability to represent the S-shaped pattern. The Plomari and Kos earthquakes score third and fourth highest, respectively, while the Doğanyol Earthquake achieves the top score and distinctly displays an S-shaped pattern, indicating its significance in the magnetic field behavior. The Özalp Earthquake scores second-best with a distinct S-shaped pattern, while the Karlovasion Earthquake receives the lowest score with no evident S-shaped pattern. Additionally, vertical scores indicate the Y and Z components with more pronounced S-shaped patterns, while the X and F components receive lower scores. Notably, the onshore Doğanyol Earthquake exhibits the most pronounced S-shaped pattern across all magnetic components, attributable to its shallow strike-slip fault at 10 km depth, while the offshore Karlovasion Earthquake, generated by a normal fault at 21 km depth, displays the most scattered pattern, providing valuable information on the influence of tectonic settings on magnetic field behaviour. In conclusion, this study provides valuable insights into the magnetic anomalies associated with seismic events in the region, significantly contributing to a better understanding of earthquake precursors and seismicity patterns, and enhancing seismic risk assessment and mitigation strategies.